Version 34 - 09/12/10 - Added fractional framerates and fix tab display on web GUI.

Version 33 - 05/10/10 - Added ability to use same UDP port for ARQ and data.

Version 32 - 02/23/10 - Fix bug from v.30 to remove extra set source IP msgs.
	Add loopback support.

Version 31 - 08/23/09 - Relink with libs110 for cgiparse fix & proxy back compat.

Version 30 - 08/05/09 - Fix ARQ on rcvr to work with multiple air-card modem.

Version 29 - 07/30/09 - Reduced latency for Transport Streams. Add Encoder
                        profile parameter to strip out Null TS packets.

Version 28 - 07/08/09 - Fixed strip CBR, was stripping out NULL TS packets.

Version 26 - 11/20/08 - Merged features from analog codec, including support for
    factional frame rates.

Version 25 - 10/05/08 - Added additional out of order queue to ARQ and RTP for
  extremely high jitter networks.

Version 24 - 07/23/08 - Added cgi-bin2/announcement.sdp URL for HTTP SDP queries

Version 23 - 04/17/08 - Added web GUI check for burst drop < target latency.

Version 22 - 03/13/08 - Fixed DHCP behaviour.

Version 21 - 02/26/08 - Fixed Timezone in WEB UI.

Version 20 - 02/19/08 - Fixed bug in SNMP Community string having quotes.

Version 19 - 02/18/08 - Added RS232 over IP.

Version 18 - 02/11/08 - Added SNMP v1 Traps.

Version 17 - 02/05/08 - Minor GUI improvements.

Version 16 - 02/01/08 - Added video aspect to encoder profile for 16:9 versus
 4:3 video.  If there is no composite signal when starting the stream, the
 system waits for a valid signal. 
 (NOTE: For SDI the SDI signal must be present before starting the stream.)

Version 15 - 01/26/08 - Added half video frame rate and more PAL resolutions.

Version 14 - 12/26/07 - Added support to connect to QVidium video server.

Version 13 - 12/23/07 - Improved decoder setup web page.

Version 12 - 12/16/07 - Added three pacing modes: Full, Medium, and Off.
 Increased TS bit rates: 7.5 MB/sec for ProMPEG FEC, 6.5 MB/sec for ARQ, and
 9 Mb/sec for RTP and UDP.

Version 11 - 11/13/07 - Added better minimum encoder stream bitrate checks.
 Force audio sample rate to 48KHz for SDI Encoder Profile.

Version 10 - 10/15/07 - Added SNMPv2 traps for loss network packets,
 unrecovered packets and zero bitrate received on the decoder.

Version 08 - 08/21/07 - Fixed Codec mode operation

Version 07 - 07/26/07 - Added checks for Decoder Profile Notification Section
 to prevent user entering the decoder's IP address.

Version 06 - 07/16/07 - Added better ARQ logging and decoder volume features.

Version 04 - 06/27/07 - Beta version.

Version 01 - 05/15/07 - Initial version.  SDI Encoder only.